Fire Service Instruction with Eric Makowski

Straight talk on fire service instruction

The Fastest Truck on the Airport Can Drive Right Into a Hazmat Problem

By Eric Makowski


ARFF crews are built for speed. We train to cover ground fast, get water and foam on a fire fast and get people out fast. That instinct saves lives on an aircraft fire. On a chemical release, it can put a crew right in the middle of the problem before anybody knows what the problem is.

The airport is a hazmat site every day

People think of airports as aviation. Look a little closer and you’ll find a lot more. Fuel farms and fuel trucks. Deicing fluid by the thousands of gallons. Cargo ramps moving packages that contain everything from lithium batteries to corrosives, compressed gases and radioactive material that’s legally shipped every day. Maintenance hangars full of solvents and hydraulic fluid. Utility plants with refrigerants and treatment chemicals.

When a package leaks in a cargo building, a ground vehicle spills on the ramp or somebody reports a strange odor in a hangar, the first truck rolling is usually an ARFF truck. That makes us the first-arriving hazmat responders whether we’ve thought of ourselves that way or not.

Slow down on the approach

The mistake I see most is crews driving the hazmat call like a fire call. Lights on, straight in, park close and go to work. On a release, close is the wrong place to be.

Approach from upwind and uphill whenever you can. Check the windsock before you commit. Stop well short and look before you drive any further. Binoculars earn their spot on the truck on these calls. Read placards and labels from a distance. Watch for vapor clouds, pooling liquid, frost on a container that shouldn’t be cold, dead vegetation or people who are down for no obvious reason.

That last one deserves its own line. If you see more than one person down and you can’t see why, assume the atmosphere is the reason. Rushing in to grab them is how one patient turns into three.

Open the Emergency Response Guidebook before you open a door. If you can identify the material from a placard, a label or the shipping paperwork, the guidebook gives you an initial isolation distance and protective action guidance. On the cargo side, the shipping documents, and for a loaded aircraft the flight crew’s dangerous goods notification, can tell you what’s on board. Ask for them early.

Isolate, deny entry and call for help

Once you know you’re dealing with a release, the first job isn’t fixing it. It’s keeping it from getting bigger and keeping more people from walking into it.

  1. Isolate the area. Set a perimeter using the guidebook distance as a starting point and make it bigger if conditions call for it.
  2. Deny entry. Coordinate with airport operations to stop ground traffic, close the affected ramp or taxiway and keep tugs, fuelers and curious employees out.
  3. Request the right resources early. A hazmat team takes time to arrive. Call them the moment you suspect you need them, not after you’ve confirmed it.
  4. Report what you know. Product if you have it, location, wind, number of people involved and what you’re seeing.

None of that requires anyone to get close to the product. All of it makes the incident safer for whoever does.

Know where your PPE stops

Structural turnout gear and SCBA are good at what they’re designed for. They are not chemical protective clothing. SCBA protects your lungs, but plenty of hazardous materials can get through your skin or soak into your gear and stay there. Walking into a cloud because you’re on air is not a plan.

Know what level your crew is trained to. Many ARFF crews are trained to work defensively at the operations level: isolation, protective actions, controlling a spill from a safe distance, supporting decon. Offensive work, like stopping a leak at the source, belongs to people trained and equipped for it. Every instructor has had a student ask why they can’t just go plug it. The answer is that knowing when not to go in is part of the job, not a lack of nerve.

Put it in your training plan

Hazmat at the airport doesn’t need a full-scale exercise to train. Start small.

Run a tabletop on a leaking package in the cargo building. Walk your fuel farm and your deicing facility with the crew and ask where the wind would carry a release and where you’d stage. Give a driver a scenario and a placard number and make them find the isolation distance in the guidebook with a clock running. Coordinate with airport operations so they know what you’ll ask for when you call.

Then add a hazmat call into a regular drill day without warning. See whether the crew drives in hot or stops short and looks.

The takeaway

Speed is a strength in ARFF. On a hazmat call, judgment matters more. Approach upwind, stop short, identify before you act, isolate and deny entry, and get the right help moving early. The firefighters who go home from these calls are the ones who took a minute to figure out what they were driving into.

Stay safe, and train like it matters.

Eric Makowski

Eric Makowski has spent 29 years in the fire service and writes every Monday, Wednesday and Friday about fire instruction: how we teach, how we train, and how we can do both better. More about Eric →

Leave a Reply